Forming Insulated Walls

Using traditional aluminum forming with insulation system.

Forming panels & Insulation

This pictures show the 12" spacing of forming material with 2" thick insulation & furring strips that are secured when poured into the concrete.

Overview of 8' Basement

Picture shows the basement after the pour. This home has a daylight design with two treated lumber window openings.

Interior of insulated basement

Dependant Foundations can also sets steel, preped and pour the interior flatwork.

Insulated Walls & Flatwork

This picture shows the completed project. Walls, insulation, set steel, and flatwork!

9' Insulated Walls "Walkout"

Insulated 9' walls with treated lumber to form the openings for walkout.

10' Insulated Walls "Walkout"

This pictures shows 10' walls with wine celler and walkout area.

Running Electrical

A wood templet was created for running router down to outlets and cut out boxes and switches. Note that the templet has box types and location heights pre-cut on to the jig.

Router out the foam

Foam is routered out 1-3/4" deep.

Running the wire

The wire is run down the routered chanel and secured in 3 or 4 locations for inspection. Then filled with expanding foam.